For every risk/reward there is a win rate at which a strategy neither gains nor loses. Knowing that line lets you judge quickly whether a setup's win rate is in a plausible range.
Where expectancy is zero
Set expectancy to zero and solve for the win rate. With losses of 1R and wins of RR, the break-even win rate is 1 ÷ (1 + RR). Above it the rules had positive expectancy, below it negative.
Break-even win rate = 1 ÷ (1 + RR)| Risk/reward | Break-even win rate |
|---|---|
| 0.5R | 66.7% |
| 1R | 50.0% |
| 1.5R | 40.0% |
| 2R | 33.3% |
| 3R | 25.0% |
| 4R | 20.0% |
The table shows the trade-off: larger targets need fewer winners, but larger targets are also reached less often. Neither end is better by itself; a strategy only has an edge if its actual win rate sits above the line for its actual risk/reward.
Costs move the line
Costs such as spread and commission are paid on every trade. If they amount to c R per trade, a winner pays RR − c and a loser costs 1 + c. The break-even win rate becomes (1 + c) ÷ (1 + RR).
Worked example
Break-even with costs
- A strategy targets 2R; before costs it breaks even at 1 ÷ 3 = 33.3%.
- Spread and commission cost 0.1R per trade.
- Break-even with costs = (1 + 0.1) ÷ (1 + 2) = 1.1 ÷ 3 = 36.7%.
- A measured win rate of 35% was profitable before costs but is below the line after them.
Costs of 0.1R raised the required win rate by 3.4 percentage points.
Using the line
- Compare the measured win rate with the break-even line, including costs.
- Prefer a comfortable margin: a win rate one or two points above break-even is easily noise.
- When you change the target in a test, check how both the win rate and the line move.
Key takeaways
- With 1R losses, the break-even win rate is 1 ÷ (1 + RR).
- Bigger targets need fewer winners but are usually hit less often.
- Costs of c R per trade raise break-even to (1 + c) ÷ (1 + RR).
- A small margin above break-even can easily be noise.