Build a moving-average crossover

A step-by-step build of a complete strategy graph, from the Data node to the Trade entry node.

All courses · Lesson 2 of 5 · Intermediate · 5 min

This lesson builds a complete long-only moving-average crossover from the Data node to the Trade entry node, with a stop from ATR and a target at twice the risk. The aim is to learn the pattern, not to suggest the strategy is profitable.

The idea in words

Enter a long trade on the candle where a fast moving average crosses above a slow one. Place the stop 1.5 ATR below the entry and the target at twice the distance to the stop. The numbers used below, 20 and 50, are examples, not recommendations. Nodes can be placed anywhere in the editor, so build it from left to right.

The fast average crossing above the slow one: the single candle where the entry trigger should be true.

Step 1: the averages and the state

  1. Add a Data node. Add two SMA nodes and set Period (N) to 20 on one (the fast average) and 50 on the other (the slow average).
  2. Connect Data.Close to the Data input of both SMA nodes.
  3. Add a GreaterThan node. Connect the fast SMA output to A and the slow SMA output to B. Its Result is true on every candle where the fast average is above the slow one.

Step 2: only on the crossing candle

The state alone is not enough. If the Trade entry trigger were connected here, it would be true on every candle while the fast average stays above the slow one, which can be dozens of candles in a row. You want to enter once, on the candle where the state changes from false to true.

A crossing means that the fast average is above the slow one now and was not above it one candle ago. PreviousValue takes a number and returns the value from one candle earlier, so apply it to each average, not to the boolean.

  1. Add two PreviousValue nodes. Connect the fast SMA to one and the slow SMA to the other. Their Previous outputs are last candle's averages.
  2. Add a second GreaterThan node with the previous fast value on A and the previous slow value on B. Its Result says whether the fast average was above the slow one on the previous candle.
  3. Add a Not node and connect that second Result to its input A. It is true when the fast average was not above the slow one one candle ago.
  4. Add an And node. Connect the first GreaterThan Result (the state now) to A and the Not Result to B.

Worked example

Why the trigger fires once

  1. Suppose the fast-above-slow state over seven candles is: false, false, true, true, true, false, true.
  2. The previous-candle state is the same list shifted by one: (none), false, false, true, true, true, false.
  3. The trigger is the state now And Not previous state, which is true only where the state is true and the previous state was false.
  4. That is candle 3 (true after false) and candle 7 (true after false). Candles 4 and 5 are true but follow a true, so Not makes them false.

Without the previous-candle check the trigger would be true on 4 candles (3, 4, 5 and 7); with it, only on 2 (3 and 7), one per crossing.

Step 3: the entry and a stop from ATR

  1. Add a Trade entry node, set the direction to buy and the entry price type to Market. Connect the And Result to Trigger.
  2. Add an ATR node (for example a period of 14) and connect Data.High, Data.Low and Data.Close to its High, Low and Close inputs.
  3. Add a Multiply node with the ATR output on A and a number constant of 1.5 on B. That is the stop distance.
  4. Add a Subtract node with Data.Close on A and the Multiply Result on B, then connect its Result to SL1. The stop is the close minus 1.5 ATR.

Step 4: a target at 2R

A target at 2R is twice as far from the entry as the stop is. The graph needs the risk, which is the entry minus the stop, then twice that, added to the entry. Here Data.Close stands in for the entry price.

Risk = Entry − Stop
Target = Entry + 2 × Risk
Built from Subtract, Multiply (by 2) and Add, ending in TP1.

Worked example

The numbers on the crossing candle

  1. On the crossing candle the close is 100.30 and the ATR is 2.00.
  2. Stop distance: 1.5 × 2.00 = 3.00, so the stop is 100.30 − 3.00 = 97.30.
  3. Risk: 100.30 − 97.30 = 3.00. Twice the risk is 2 × 3.00 = 6.00.
  4. Target: 100.30 + 6.00 = 106.30. Reward to risk is 6.00 / 3.00 = 2.

Entry 100.30, stop 97.30, target 106.30: risking 3.00 per unit to aim for 6.00 per unit.

Connect the final Add Result to TP1. Connect Data.Close to Entry Price too, so the graph and your calculation use the same reference. With the Market type the actual fill can differ from the close, so compare the entry prices in the replay with what you expected.

Key takeaways

  • A comparison of two averages is a state; adding a PreviousValue check with Not and And turns it into a one-candle crossing event.
  • PreviousValue takes numbers, so apply it to each SMA output and compare the earlier values in a second GreaterThan.
  • An ATR stop is Subtract of close and ATR × 1.5, fed into SL1.
  • A 2R target is entry + 2 × (entry − stop), built from Subtract, Multiply and Add, fed into TP1.

Sign in to save your progress and quiz results.