Leverage, margin and position size

What leverage really does, why it is not the same as risk, and how margin calls happen.

All courses · Lesson 5 of 6 · Beginner · 4 min

Leverage lets you control a position much larger than your account balance, and it is often described as dangerous. The truth is more precise: leverage changes how much margin a trade needs, while the amount you can lose on a trade is set by your stop distance and position size.

What leverage and margin mean

Margin is the amount of your own money the broker sets aside as a deposit to keep a position open. Leverage is the ratio of the position's value to that margin. At 1:30 leverage, a position worth 30 units needs 1 unit of margin. Higher leverage means a smaller deposit per position, not a bigger or smaller possible loss for a given stop.

Margin required = Position value / Leverage
Risk = Stop distance (pips) × Pip value × Lots
Leverage appears in the first line only. The second line decides what a stopped-out trade costs.

Leverage changes margin, not risk

The loss on a trade is the price move against you multiplied by the position size. Leverage does not appear in that calculation. A trader who risks 1% of the account with a stop at 20 pips takes the same 1% loss whether the broker offers 1:30 or 1:100.

Worked example

Same risk, different margin

  1. Account: $10,000 (USD, to avoid currency conversion). EUR/USD is at 1.0850 and a standard lot is 100,000 units, worth 100,000 × 1.0850 = $108,500.
  2. Risk 1% = $100. With a 20-pip stop and about $10 per pip per lot, size = 100 / (20 × 10) = 0.5 lots.
  3. At 1:30, margin per lot = 108,500 / 30 = $3,616.67, so 0.5 lots needs $1,808.33.
  4. At 1:100, margin per lot = 108,500 / 100 = $1,085, so 0.5 lots needs $542.50.
  5. In both cases, a stop-out after 20 pips loses 20 × $5 = $100.

Leverage changed the margin from $1,808.33 to $542.50, but the loss at the stop stayed $100, or 1% of the account.

How a margin call happens

Your equity is your balance plus or minus open profit and loss. The margin level is equity divided by used margin, as a percentage. When it falls below a threshold set by the broker, you receive a margin call, and at a lower threshold open positions are closed automatically (a stop-out). The thresholds vary between brokers, so check yours.

Worked example

A margin call with no stop loss

  1. Account $10,000, buying 2 lots of EUR/USD at 1:30. Position value = 2 × $108,500 = $217,000, so margin used = 217,000 / 30 = $7,233.33 (held constant for simplicity).
  2. Effective leverage on the account = 217,000 / 10,000 = 21.7 to 1.
  3. Each pip on 2 lots is worth 2 × $10 = $20. Assume a margin call at a 100% margin level: equity must fall to $7,233.33.
  4. Loss to reach that = 10,000 - 7,233.33 = $2,766.67, which is 2,766.67 / 20 = 138.3 pips of adverse movement.
  5. Compare this with a 20-pip stop on the same position: the planned loss would have been 20 × $20 = $400, or 4% of the account.

Without a stop, a 138-pip move (about 1.3%) against the position triggers the margin call, by which time 27.7% of the account is lost.

Key takeaways

  • Margin is the deposit for an open position, and leverage is the position value divided by that margin.
  • Leverage changes the margin required, while the loss at a stop is stop distance times pip value times lots.
  • A margin call occurs when equity falls too far relative to used margin, and the thresholds depend on the broker.
  • Size positions from the stop distance and a small risk percentage, not from the largest position the margin permits.

Sign in to save your progress and quiz results.