All docs

Node reference

Every node type in the node library, grouped by category, with its inputs and outputs.

These are the built-in nodes in the Node library, grouped by the categories the library shows. Sockets carry a number, a boolean (true or false) or a list of numbers (number[]).

Click a node in the library, drag it onto the canvas, or right-click the canvas to add it. See Build logic with the graph editor.

Data

Node Outputs
Data Open, Close, High, Low, Time, Volume, Spread at high, Spread at low (all numbers)

The Data node gives you the candle the graph is looking at. Most graphs start here.

Node Outputs Settings
Source Value Value, timezone

Source gives one value of the current candle without wiring: open, high, low, close, volume, hl2 (high + low) / 2, hlc3 (high + low + close) / 3, ohlc4, hlcc4, the time in milliseconds, or a part of the time (hour, minute, weekday with 1 = Monday, day of month, month, year) in the timezone you choose. Markets without volume read 0.

Indicator

Node Inputs Outputs Settings
SMA Data SMA Period
EMA Data EMA Period
ATR High, Low, Close ATR Period (14 by default)
RSI Close RSI Period (14 by default)
MACD Data Histogram, MACD, Signal Fast period, Slow period, Signal period
PricePoint Price, Timestamp none Name
NumberIndicator Value none Name
SelectionIndicator One boolean input per option none Name, default option

| MovingAverage | Value | Average | Type (SMA, EMA, RMA, WMA), Length |

SMA is a simple moving average and EMA an exponential moving average. ATR is the average true range.

MovingAverage offers four averages: SMA, EMA, RMA (Wilder's smoothing, also called SMMA) and WMA (linearly weighted). Its EMA and RMA start from the simple average of the first Length values, as on TradingView, so they match TradingView values once enough candles have passed. The older EMA node starts from the first value instead and reaches the same values after its warm-up.

PricePoint, NumberIndicator and SelectionIndicator record a value under a name you choose. Use them for values you want stored with a trade.

Math

Node Inputs Outputs
Add, Subtract, Multiply, Divide A, B Result
GetNthValue Values, Position Result (setting: n)
Min, Max Values The minimum or maximum, and its Position
Sum, Average Values The sum or the average
Math A, B Result (setting: function)

Math applies a function: abs, -A, sign, sqrt, exp, ln, log10, round, floor, ceil, A ^ B, min, max or A mod B. Functions of A alone ignore B. A result that is not defined, such as the square root of a negative number or the logarithm of 0, is 0. Divide also returns 0 when B is 0.

Conditional

Node Inputs Outputs Notes
GreaterThan, LessThan, EqualTo A, B Result (boolean) Compares two numbers.
If Condition, If true, If false Value Picks one of two numbers.
Time Time Active (boolean) A trading schedule. See below.
Compare A, B Result (boolean) A > B, A >= B, A < B, A <= B, A = B or A != B. Equality can allow a tolerance.
Cross A, B Crossed (boolean) True on the candle where A crosses above B, below B, or either.
NewPeriod Time New period (boolean) True on the first candle of each day, week, month or year. See below.

Cross works like TradingView's crossover: A crosses above B when A is above B now and was at or below B one candle earlier. It is never true on the first candle.

The NewPeriod node

Connect the Data node's Time output to it. The output is true on the first candle of each new period, and on the very first candle.

  • Period: day, week (starting Monday), month or year.
  • Timezone and Session start: when a new period begins. The forex trading day, for example, starts at 17:00 in America/New_York.
  • Warm-up candles: how much history values that restart each period need before signals are trusted, for example one day of candles for a daily VWAP.

Use it as the Reset of a Cumulative node or the Condition of a ValueWhen node to build session values such as VWAP or the previous day's high.

The Time node

Connect the Data node's Time output to it. The output Active is true while the schedule applies.

  • Schedule: At or after or Time range.
  • Start (inclusive) and, for a time range, End (exclusive).
  • Session start days: the weekdays the session starts on. Overnight ranges belong to the day they start. With no days selected the output is always false.
  • Timezone: UTC by default.

Logic

Node Inputs Outputs
And, Or A, B Result
Not A Result

Persistent

Node Inputs Outputs Notes
PreviousValue Value Previous Remembers the value it received before the current one.
SlidingWindow Value Values (list) Collects recent values into a list. Setting: Period.
History Value Result The value N candles ago, the change since then, or the change in percent. Settings: Result, N candles.
Direction Value Result (boolean) Rising: above each of the previous N values. Falling: below each of them.
Rolling Value, Second Result A statistic over the last Length values. See below.
Cumulative Value, Reset Result Running sum, maximum or minimum, restarted when Reset is true.
BarsSince Condition Bars, Seen Candles since the condition was last true (0 on that candle).
ValueWhen Condition, Value Value, Seen The value on the candle where the condition was true. Occurrence 0 is the most recent.
Feedback Value Previous The value it received on the previous candle. The only node that may close a loop.

Rolling statistics: sum, standard deviation and variance (of the whole window, as TradingView's stdev), median, highest, lowest, candles since the highest or lowest (a tie counts from the most recent candle), percent rank (the share of the previous Length values that are at or below the current one), linear regression value and slope, mean absolute deviation, and the correlation of Value with Second.

Seen on BarsSince and ValueWhen is false until the condition has been true once. Until then Bars counts the candles evaluated so far and Value is 0.

Feedback is for values that depend on their own previous value, like a trailing stop, Supertrend or Parabolic SAR. Wire a later result back into its input: its output is that result from one candle earlier, or First candle value on the first candle. Everywhere else a loop is not allowed. Warm-up candles adds history so the value can settle before signals are used.

How values behave at the start of the history

Every node gives a number on every candle. While fewer candles than a window needs exist, Rolling, MovingAverage and History use the candles that are available. Before a trade can be signalled the graph is warmed up with as many earlier candles as its longest window needs, the same way in backtests, previews and live trading. Cumulative, BarsSince, ValueWhen and Feedback carry their value from the first evaluated candle, so their level can depend on where the history starts unless they restart with a condition.

Constant

Node Output
Number A number you type in.
Boolean True or false.

Visualize

These nodes draw on the chart. They do not change the trades.

Node Input Settings
VisualizeLine Data Colour, thickness
VisualizeHistogram Data Colour, thickness
VisualizeArrow Signal (boolean) Colour, position (above or below the bar)

Execution

Node Inputs Settings
TradeEntry Trigger, Entry Price, and one price pin for each stop loss and take profit Direction, Entry price type, named stop losses and take profits

TradeEntry opens a trade when Trigger is true.

  • Direction is Buy or Sell.
  • Entry price type is Price or Market.
  • Use Add to add more stop loss or take profit pins and give each a name. Each named pin takes an exit price. Connected pins are recorded when Trigger is true.

TradeEntry is available in trading graphs only, not in indicator graphs.

Custom

A Custom node is a group of nodes packed into one. Right-click a node and choose Group into custom node to create one, or add a reusable graph from My graphs or Published in the library.

The Published tab also lists the QuantRaider built-in indicators, such as RSI, MACD and Bollinger Bands, all built from the nodes on this page. See Built-in indicators.